HOME LED FILM SHOP PROJECT COST EVALUATION TERMS/AGB PICS & VIDEOS ABOUT US

English | Deutsch | Francais

LED Films, also known as LED embedded Films, can be based on transparent conductive coating or based on printed conductive coating. The main advantage to use transparent coating is not only its transparency. It is the fact that Film sizes of 3.5 m x 1.2 m can be achieved. But the low conductivity of transparent coats limit the current to 13-15 mA per SMD LED. Printed film can be used between 15 - 30 mA/LED. However, the size is usually limited to 0.75 m x 0.75 m.

 

-> Download Material Datasheet Transparent LED Film [752 KB]

English | Deutsch | Francais

Transparent LED Films are produced on customer design.
Maximum Length: 3.50 m ; Maximum Width: 1.25 m
Thickness of film: 125 Micrometers ; of LEDs: 0.8 mm
Transparency: L* > 90.5 % ; T > 79.0 %
Colour value a* and b*: Between -2.5 and +1
Minimum LED Distance: 5 mm
LED Colours: Amber, Red, Blue, Green, White
Maximum LED Current: 15 mA/LED

 

English: | Francais | Deutsch

Printed Films allow stronger LEDs or separate control of many LED Groups. They are not transparent.
Maximum Film Size: 75 cm x 75 cm
Film Thickness: 175 Micrometers
LED Thickness: 0.8 - 1.2 mm
Maximum LED Current: 15 - 30 mA/LED
Minimum LED Distance: 5 mm
LED Colours: Amber, Red, Blue, Green, White

 

English: | Deutsch: | Francais:

You want to check some samples? The fastest and cheepest way is to get samples from the ->shop. You may also e-Mail us your design request for samples. But this will be more expensive and slowlier than with standard samples.

You want to check prices? Use the "customer design products" within the webshop: Define the size, the LED Quantity and you will get the price as function of film quantity.

You want to realize an own design? Send it to us as e-Mail. The ideal file type are 2002 dwg/dxf including film geometry, placement of contacts and placement of LEDs. Alternative: JPG of manual drawing.

 

English: Next Steps | Deutsch: Verbundprozesse | Franšais: Útapes antÚrieures

Typical customer processes with SUN-TEC SMD LED Films:
- Glass lamination processes below 125 °C
- Embedding by overmolding below 125 ° C
- 3D doming at room temperature

 

LED Films after customer processing

Klicken Sie hier, um zur Galerie zu gelangen.

STAIRS

Klicken Sie hier, um zur Galerie zu gelangen.
SUN-TEC
SWISS UNITED TECHNOLOGIES

Eichengasse 2
6331 Huenenberg
Switzerland
info@sun-tec.ch

Ph: +41 79 688 86 48
Fax: +41 41 781 49 11
Skype: sun-tec

VAT: CH-590 094
Credit card payments on
PAYPAL: info@sun-tec.ch

or Wirebanking to:
SUN-TEC GmbH, 6331 Huenenberg
BANK: UBS AG, 6301 Zug
IBAN: CH260027327327373801W
SWIFT: UBSWCHZH80A
Printer-friendly version
Country of Origine: Switzerland - Taric Code: 3920 62 19